Home / All Post

Tuesday, November 28, 2017

This is the 'Move On' Strategy Ferrari and Lamborghini from Segment Supercar

Add Comment
Competition between the 2 Supercar Manufacturers is likely to continue. After the announcement that Ferrari is planning to produce the Sport Utility Vehicle (SUV) model, while its rival Lamborghini has taken immediate steps to determine the production site for its new SUV, the model is rumored to be released sometime in December 2017 or early 2018 and it means that the two are racing out of focus as a car manufacturer of supercars.

The Lamborghini production site has doubled from 80,000 to 160,000 square meters in 18 months, with manufacturers operating at full capacity and reaching new sales records last year.

According to Lamborghini CEO, Stephan Winkelmann revealed that the super sports car that is usually produced is believed to use a highly appropriate naturally-aspirated engine. "But for Urus, turbochanged engine is the most fitting choice. "Said Stephan Winkelman.

The statement was increasingly asserted that the presence of Urus is not as a Supercar model as usual. Director of Research & Development Lamboghini, Maurizio Reggiani adds, "With a more reliable engine that can make Urus the strongest in its class. This means that the power of Urus can penetrate more than 600hp with the highest speed claimed over 301mp /h.

While talking about the rival, Ferrari itself is known to not want to miss. The reason this time, Ferrari is also preparing a crossover variant that is already visible surface. Ferrari's CEO, Sergio Marchionne revealed that his company is ready to release their first crossover.

Quoted from Cascoops, speaking to Bloomberg on the New York Stock Exchange, Marchionne says Ferrari will decide how many crossover variants will be built within the next 30 months. Regardless of the amount of production that will be restricted to preserve exclusivity.

With the latest "Move on" strategy done by Ferrari and Lamborghini, are you interested in doing the same strategy with them to improve your standard of living? By replacing your old car with the SUV and the latest from both these car manufacturers ?. 

Wednesday, November 22, 2017

How to Drive a Manual Car

2 Comments






Driving the manual at first does look hard. You should be able to synchronize both feet to use the clutch, brake and gas pedals. In addition, you must also be able to control the steering wheel and gear lever accurately.

Although it looks complicated, driving a manual car is actually fun. Especially for those who like to accelerate and enjoy the engine power of the car. As long as studied painstakingly and slowly, then driving a manual transmission car can be easily mastered.

Most people who will drive a car actually already understand the functions that are in the car. But there are some drivers who think that driving is easy and easy, which assumes like that usually only people - people who want to rush driving on the highway. And if they realize that the hasty thing that can endanger themselves and others. There are many things to watch out for if you want to drive a car.

1. Adjusting the Seating Position

If you want to start to drive a car then take a sitting position that can make you comfortable on the way. Because the seat also greatly affects your feet in the stamping of the brake, gas, and clutch. In applying the pedal that is on the right foot, left and center legs, you should really be able to fully tread for your journey to be safe. 
  
2. Understand Features Of The Manual Car Which We Will Use

Before starting to learn how to drive a manual car, it helps you to start from learning the features and the ins and outs of the car's steering wheel. For example, start recognizing which gas pedal, brake and clutch, and how to use it. For example, the right foot for gas and brakes, while the left foot is just for stepping on the clutch.

Not only there, you must also study the position of the transmission of the car and how to move from one transmission to the next transmission, the position of the neutral transmission lever, to reverse and others. See also the centimeter bag, indicators and all the features needed to drive a car. 

3. Find the Right Learning Locations

The key to success while learning to drive a manual car is to practice a lot with all the conditions and terrain. But at the beginning, choosing a spacious and quiet place is a perfect choice. In a field or empty area, you can easily start learning to start and run the car without worrying about cars jumping and crashing into trees or even vehicles and others.

Once smooth in an empty area, start to increase difficulty by driving in areas such as highways, but search for the quiet and not many people passing by. If it is smooth, start to increase the difficulty as in crowded roads, uphill, intersections, congestion and so forth. 

4. Understanding the Clutch Function

 Clutch is one tool that serves to break the engine rotation and wheel rotation that is still in touch, but it also serves to change teeth or add and reduce the tooth that you will use without damaging the gears in each transmission gear. Keep in mind again if you want to reduce or add teeth then you should not forget to step on the clutch pedal. So the main thing that exists on the car is the rotation of the car engine, clutch, transmission, and wheels of the car. When the engine is turned on then the engine undergoes as much as 1500 per minute, the number of rounds depending on the type of car respectively - each.

You should know that the car engine has experienced a lap even though the car has not run. Because the rotation that occurs on the machine can not connect to the wheels so the wheels will not be able to move. So that connects from the wheel to the engine rotation of the clutch of the car. The engine with the pivot, the clutch and the wheel will be connected if the gears are in the position of 1,2,3,4,5, and R and with the coupling position there is no pressure. if the gear is in a Normal position (N) then the engine rotation, clutch and wheel will not connect. 

5. Arrange Concentration Well

The difficulty that people experience when learning a car with a manual transmission is to align the gas pedal and clutch. If the clutch is removed too quickly and the gas has not been stepped on, then the car engine will die or falter. But if the gas is too large and the slow coupling is released, the engine will grow loud but does not move.

Simply put, coupling and gas in a manual car can be likened to a seesaw. If the clutch is released slowly, the gas should be stepped on slowly. With lots of practice and concentration, you'll find the right alloy when to take off the clutch and step on the gas.

In addition, you also have to divide the concentration to step on the gas, step on the clutch while moving the transmission and rotate the steering wheel properly. 

5. Always Ready to Step on Brakes

If the car has gone, prepare yourself to slow down or even stop your car. Never be afraid to take off the accelerator and hit the brake. Slowly, you will also learn how the car's response to the brake pedal you step on. 

6. Moving the Transmission LeverHow to Drive a Car The most important manual is knowledge of the gear lever. When the engine is turned on and the sound is stable then move the transmission lever from neutral (N) to the position of the gear 1. The one gear is in the position of the upper left of the transmission lever, the lever must have no clues or writing or drawing the position of each tooth. Start the car by stepping on the clutch in full, moving the gears to the first gear, the right foot is ready in the gas position, lifting the clutch slowly until the car starts moving then lift the clutch fully until the car is running. Once the car is running then you can increase the speed by stepping on the gas slowly.

Once in the sense of the car runs stable then start adding tooth to second gear when the car is running. By paying attention to the RPM indicator on the machine, if it is seen past the number 2 then it could mean that already melibihi 2000 times round in minutes so that is enough if you want to add tooth into 2nd gear. Then lift the gas fully so that the engine turns down again, then stomp the clutch fully and move to the tooth 2, slowly lift the clutch until half and then step on the gas slowly and coupled by lifting the clutch until fully lifted. 

7. Recognizing Car Sound

How to recognize the car is to step on the clutch pedal with full and slowly lifting the foot until the sound of the engine sound down. Then start the car slowly while lifting the foot that is on the clutch pedal and step on the gas slowly. 

8. Running the Car

If you want to run the car then slowly lift your feet in the clutch position until the engine speed decreases and then step on the gas pedal slowly. You should be able to balance the gas and the clutch slowly. The way you should try repeatedly to pressure when stepping on the gas and remove the clutch can be dikominasikan.Selain you can also try to find the combination of gas and clutch to the maximum. In this case you should also be alert and concentrate on the handbrake if you have to stop in an emergency.

If your clutch pedal is off too fast then your car engine will die. You should pay attention to the sound of the engine whether the car sounds like a car like to die or not then lalukan detention on the clutch pedal deeper. Excessive car engine turnover when the clutch on the stomp then it can cause quick clutch wear and clutch can also issue smoke.

9. Stepping Clutch Full
Clutch the clutch fully and hold it, this is one of the good things you should keep in mind to notice how the distance between the clutch pedal swing and the brake pedal or the gas pedal. And it is necessary to remove the clutch pedal carefully and regularly until you hear the sound of the engine has started to step on the clutch pedal so many times that you can recognize the sound of the car engine.




Monday, November 20, 2017

Amazing, Soon the Car can Detect Heart Disease and Diabetes

Add Comment

Washington - Car manufacturers are increasingly developing security technology in every production car. Back in 1998 for example the seatbelt standard began to be set as one of the safety standards on the car. Then in the 1970s airbag features began to be introduced.

Currently began to grow much more related to the car without a driver and in the future it is predicted there will be features that make the car can detect the health condition of the rider.

For example, Toyota and Ford are currently conducting research to put health censorship on car technology without a driver. The car can go straight to the curb and call for help shortly after detecting the rider having a heart attack or diabetes.

"Heart rate and blood glucose levels can actually be effectively controlled because otherwise both are the biggest causes of accidents on the road," said Senior Executive Engineer Toyota Chuck Gulash told CNBC on Monday (20/11/2017).

In 2009 said Chuck, the national traffic safety agency of the United States noted that diabetes contribute 20 percent of the incidence of accidents while heart attacks recorded only 11 percent. The riders do not realize that they suffer from the disease and can actually increase the number of accidents.

"For thirty years we did research on the cause of the accident, but there was little to do with the psychological condition of the rider," Chuck said.

Heart attacks are even more dangerous because the rider may suddenly become unconscious, thus endangering other riders as well.

Sunday, November 19, 2017

How To Care Your Automatic Car

Add Comment



Matic Car is one type of vehicle that will give a sense of comfort to the owner. Because when driving a car for beginners is actually very difficult. In the manual car that is complete with automatic transmission, so it can facilitate you car lovers. In Indonesia has a very significantly increased sales rate in car matic sales.

Matic car has indeed provided evidence that the contribution means improving performance in driving. Very simple if the appealed by a vehicle or a car that bertransmisi manual. If viewed from the other side that with the increasing number of cyclists motile that is not balanced with the growth of street segment, thus giving the impact of road users are very solid, then here is the advantage of matic car.

It should also be known that you can get comfort and ease in driving a vehicle, then you also have to know what treatments you should do to maintain the security and comfort  

For people who are conventional and not yet accustomed to having a matic car, most of them still have the thought that car matic is quite troublesome in terms of care. In addition, car care matic is also considered still expensive compared to manual cars. If you have symptoms of minor damage, then get ready to spend deep for repair.

Though the idea is not entirely true. Nowadays, caring for a matic car is no longer complicated much less expensive. All it takes is painstaking and diligent in performing routine maintenance and check the condition of all lubricants for the matic car. One of the most vital parts is definitely the matic oil condition used.

1. Service Your Car

Car service is one of the most important things. Because of the convenience and security we can get by doing the car service. For Matic service car is a very important thing because it is also to follow manufacturers who provide regulations for the service periodically. Mibil matic desperately needs an up - det about a vehicle that is very in the required by the manufacturer for each rider.

2. Changing Engine Oil

For car matic, in addition to car service then the engine oil changes should also be considered. Engine oil is also very important for your car because of the security and comfort not only through the regular service but also with the turn of engine oil then you can get the security and comfort.

3. Changing transmission oil
 
In car care matic maintains the state of its automatic transmission oil, then you matic vehicle owners must change the transmission oil regularly and regularly, because it is in the know that the car at least 25,000 km matic and is at a maximum of 50,000 km then it is required to change the transmission oil. You can use the transmission lubricant that has been recommended by car manufacturers. The type of lubricant that you often use, heavy or light when you do the vehicle then this is one of the lubricant oil replacement time usually in use.
 
4. Check Valve and Transmission Oil
 
Matic cars often experience damage to transmission gaskets such as transmission gasket leaks or transmission gasket damage. Therefore you as the owner of the vehicle must check in advance. Vehicles that have a manual type then very different from the vehicle matic. For a matic car could have damaged velve and leaking velve, then this can happen when the levers are loud and gas jolt.
 
5. Transmission Oil Transmission When Matic Exposed to Flood
 
If you are in a condition that is difficult to avoid such as flooding and heavy rain then you must change the transmission oil to avoid things that you do not want, because heavy rain or flood is large then the water can enter into the gearbox. Your matic car can experience a bad thing if you ignore it like a gear or transmission jam.
 
6. Transmission Performance
 
Checking the way the transmission performance can be checked by yourself as the owner of a car vehicle matic. Then you can place on the transmission lever in position D or R, then you can remove the car brake. If the car does not have a transmission system problem then your matic car will immediately move.
 
7. Conducting Road Testing
 
You as the owner of the vehicle, especially a vehicle that matic then you must be diligent - diligent for testing the road, how easy enough as you want to run your car matic, then for maintenance of car matic then try to move your car gear. You as a driver should be able to feel that the gears are moving closely.
If you hear strange sounds when you shift gears like a noisy voice and the car is slightly shaken then you should know that your car transmission is having problems. If you experience problems with your matic car like that then you immediately bring your matic car to the workshop that you have trusted. Because if there is a problem with the transmission of the car it is a fatal problem, because transmission is a vital part of your matic car.
 
8. Heating the Car
 
You should also note if you want to travel by car then you should pay attention to your car matic so do warm up on your car before walking away. Because heating the car before traveling or before using is one trivial thing, but many people who own a car matic but even ignore the trivial.
 
Though you should know if you are too often negligent in heating the car it will be fatal, but if once or twice will not be fatal, you will feel the disruption in your car matic engine. So do not forget to heat your car matic and need to remember in heating the car matic then the state of the transmission lever is in position N (Neutral).

9. Researching the Gears
Maintenance of the car matic next is you as the owner of the car must examine in the use of gears, you as a car user then avoid the use of "P" gears if your car matic in a state stop. If you use continuously then your matic car can be damaged at its persnelin. If you want to build your matic car then you do not use D gear, because if you use D car matic you will be damaged. To be more secure for your car matic is simply by moving the matic car transmission lever to the "P" position if you want to park the car. 

10. Recognizing Car Damage
 
Often not its compact per engine rotation matic you with matic car rate then it should note that the damage to the transmission of matic that often happens is a slip clutch, the sound of a rough engine when used to run at a very high rate but the car's rate is not balanced, when you want to move.
So when you first buy a car that is motorized matoic then you should pay attention and read the manual car matic, the manual has many benefits for you because in the guide book much to provide information on how to care for car matic properly and well, the guidebook also informs you about the matic car warranty.
 

Saturday, November 18, 2017

How To Learn Driving A Matic Car For Beginners

5 Comments

The more crowded traffic conditions coupled with congestion, it makes driving model to stop and go. If using a car with a manual transmission, then the legs will be easily tired because they must often step on the clutch pedal deeply. This then makes the car with a matic transmission more attractive. Moreover, coupled with the better technology of automatic transmission on the car.

For those who are accustomed to driving a car matic certainly think that driving a car matic is very easy. But not so with those who are accustomed to driving a manual car, or also a new one will learn to drive a car. Still needed the process of adaptation and learning about how to drive the correct car matic.

Actually, in the manual of course explained some important features that exist on your car before you ride. But to help make it easy, here are some tips to learn driving a matic car for beginners who are just learning to drive a car, or have never been driving an automatic transmission car.

How To Learn Driving A Matic Car

1. Understand Car Steering Equipment


 Matic car certainly has a different steering wheel with manual transmission car. For example, there are only two pedals that accelerate pedals (gas) and brakes without any clutch pedal. In addition the matic car transmission lever is also different and comes with letters.

 2. Understand the Meaning of Letters in the Transmission Lever Panel
 
In the automatic car transmission lever panel is always equipped with several letters. Generally the letters are P, D, N and R. Some of which may be different are the presence of numbers 3 and 2, the letter L or number 1, the letter B and the + and - sign-.

 The arrangement of letters and numbers depends on the type of matic transmission used on the car. But for the most frequently encountered, its function is:

◦D: Used to make the car move forward when the accelerator is stepped on (Drive).
◦R: Used to make the car move backwards.
◦P: Used when the car stops in the old condition or parking.
◦N: Used when the car paused. For example a red light or a standstill.
◦B: Brake or boost. Usually in CVT matic car. Used to get the engine brake when the street is down, and raise the RPM while on the road uphill.
◦Number 3, 2 and 1 / L: Functions the same as manual transmission position in car. Approximately to overdrive the transmission of the car when it requires acceleration, power or engine brake.

 3. Make sure P or N Transmission When Powering the Car

Once you know the features and driving tools on your matic car, it's time to start the car engine. But before turning on the engine, make sure the transmission lever is in position P or N. Thus, the car does not run immediately when the engine is turned on.

 4. Alter the Brakes Before Changing the Transmission Lever

 In manual cars, most people rely on handbrake and clutch when new will put the teeth into position 1 and will start running. But in automatic transmission, you have to be a little more careful. Make sure you've stepped on the brake pedal before replacing the transmission lever. This is to prevent the car from running as soon as the transmission lever is in or passing R or D position.

 Usually, when the car is parked from position P and will go forward, the transmission lever will pass the position R. If not step on the brake, let alone hand brake has been removed, then the car will immediately move backwards. This is what often causes accidents in the parking lot.

Once you understand the early workings of driving a car matic, then first identify the character of the car and the transmission of your matic car. After that, then learn how to overdrive, engine brake or also hold. The latest car matic of course has been equipped with the latest features also on the transmission technology. Understand well to make it easier for you to control it.




How To Warm Your Car In The Morning

Add Comment

Almost every car owner in the world has the same habit, ie heating the car engine in the morning or before use. There is nothing wrong with the habit, it's just that along with technological advances in the engine of the car turned out to make the necessity to heat the car becomes increasingly reduced. This is because of the existence of the Electronic Control Unit (ECU) which regulates fuel and air requirements for the combustion process to be more optimal. So heating the car to reach the optimal temperature of car engine combustion is no longer needed.
 
However, that does not mean heating the car is really not needed. Ideally, if the old car is not used (eg 6 hours or more), usually overnight and will be used in the morning, then heating the car is done for approximately 1 minute only. More than that, then the rest is just a waste of fuel alone. But keep in mind, this is for the latest output car that has brought the injection technology.

Some other things to note regarding the habit of heating the car engine is the presence of engine lubricants. It is said, after a long time not used then the engine lubricant oil will fall and no longer coat components in the machine. This is not entirely true, as it turns out that the lubricant is now capable of remaining and 'binding' to the engine components when the car is not in use. Therefore, one minute time is enough to re-lure the lubricant to work optimally. Condition, you use a car lubricant in accordance with the provisions of the vehicle manufacturer.

If your car still includes an old car, or a car that uses a carburetor, then heating the car is still a necessity that is slightly more important than the latest car engine. However, no need to heat the car up to 5 or 10 minutes. Actually, the time required is between 2 to 3 minutes. And keep in mind, when heating the car, no need to step on the gas car too deep. Let the car be in stationary condition only. And do not turn on the car air conditioner when heating, unless the car will be used in stable condition. This aims to make the engine work is not too heavy.


 Once considered enough, then please drive your car to use. But at the beginning, just walk slowly. Suppose to get out of the garage home and out of the complex. In this way, the car engine will be more stable. When the car is running, occasionally press the accelerator pedal deep enough (in the clutch conditions stepped on) to menggeber engine so that dirt and crust are contained in the engine can come out and wasted through the exhaust. Not necessarily too often, maybe only once a week.
 
Next is when you heat up the car, make sure you do it in open space. Usually, many people will park the car in the car garage inside the house. When the morning will heat the car, first open the garage door to the width of free air in and out. When heating the car engine, exhaust emissions from the exhaust will become pollution and toxins that are scattered in the air. If you heat the car in a closed garage, it is very worrying if the pollution will actually go into your own home. 

Friday, November 17, 2017

Tips For Driving Safety In The Rain

1 Comment

Driving in rain and wet road conditions is certainly different from when driving a car on dry roads. Limited visibility as well as slippery roads make you have to increase alertness and caution.

In addition to the above, here are some important things that must be considered to improve safety and comfort when driving a car in the rain.

1. Check Tire Conditions
Each tire is designed with different patterns and threads. The function of these patterns and threads is to make sure the tires run properly as they pass through wet or muddy roads. The more frequently used, the thickness of the pattern and the tire thread will be reduced. As a result, the tire will lose more grip and increasingly feels slippery especially when passing a wet road. So when entering the rainy season, it would be better to ensure thread and pattern on your car tires are still in good condition.

2. Rubber and Wiper Function
Windshield windshield wipers have a function to sweep away dirt and rain water. Some cars also have wipers on the rear glass. If it is outdated, the rubber wiper car can also get brittle and not working properly. In fact it is not possible rubber brittle wipers will make the dust is not swept properly and it makes the car glass become scratched / scuffed.
 
In addition to observing the condition of wiper rubber, it is better to pay attention to the movement and the wiper dynamo. Especially for cars that are old enough. Do not let the dynamo or wiper function can not be used when it rains when you are driving. 

3. Headlights and Fog Lamp
To help increase visibility, as well as help other motorists see the position of the car you drive, turning on the headlights is certainly very helpful. If the rain is too heavy and the headlights are not very helpful, usually fog lamp will be more useful. Make sure both of these lights work well so you will not have trouble driving through the rain. 

4. Avoid Use of Cruise Control
The cruise control feature helps keep the car steady at the driver's level. Indeed, this feature will help the driver. But when it rains, this feature can actually be dangerous because it is prone to cause hydroplanning. When the cruise control feature is enabled, the car's computer can not read the condition when the road is too wet and there are puddles so it can be out of control. Therefore, it is better to drive the car with manual speed control when conditions rain or wet streets. 
Subscribe to: Posts (Atom)